This is an OSHA-compliant safety training course intended for experienced riggers and signalers. Topics covered in this training include stability, load charts, sling types, hardware, lifting devices, weight, angles and stresses, sling hitches, crane operations, crane safety, and communication. This course meets the classroom requirement for occupational safety training. It also includes a proficiency checklist that employers can use to perform a practical evaluation. Upon completion, trainees will be able to download and print a certificate or wallet card to show that they have completed Rigger and Signalperson - Advanced training. NOTE: Only an employer can designate an employee as certified. Certification requirements can vary by state or province. Check local standards for any additional occupational training requirements.

This is a Canada-compliant safety training course intended for riggers and signalers. Topics covered in this training include definitions, sling types, hardware, lifting devices, weight, angles and stresses, sling hitches, center of gravity, and communication. This course meets the classroom requirement for occupational safety training. It also includes a proficiency checklist that employers can use to perform a practical evaluation. Upon completion, trainees will be able to download and print a certificate or wallet card to show that they have completed Canada Rigger and Signalperson - Intermediate training. NOTE: Only an employer can designate an employee as certified. Certification requirements can vary by state or province. Check local standards for any additional occupational training requirements.

This online Intermediate Rigging course includes 3 modules that cover the practices and techniques for safe slinging and rigging of loads. The material in this training course is designed for rigging and supervisory personnel who work with all types of hoisting equipment. Intermediate Rigging Course Standards This course was designed to help satisfy requirements of the following standards: CSA Z150-98 It also adheres to ANSI (American National Standards Institute) and ASME (American Society of Mechanical Engineers) standards.

This online Rigging Safety course is designed to review the hazards associated with rigging and moving loads, and discuss the equipment and safe work practices that employees should use to avoid them.

Successful commercial motor vehicle (or CMV) drivers must do all that they can to properly negotiate turns and intersections. This course demonstrates safe turn and intersection techniques in a variety of situations, including city and rural driving, single- and multi-lane roads, narrow streets, one-way streets, and roundabouts. This course is designed to help prepare drivers to follow the proper steps in making right turns, left turns, and handling intersections. After completing this course, learners will be able to: Follow guidelines for negotiating turns and intersections Describe techniques for compensating for off-tracking Explain how to make both left-hand turns and right-hand turns correctly State the most common turning mistakes Describe the proper steps in approaching intersections Explain the guidelines for maneuvering in a roundabout

This is an OSHA-compliant safety training course intended for those conducting risk assessments. Topics covered in this training include identify and assess risks, control the hazard, and evaluate the cost. This course meets the classroom requirement for occupational safety training. It also includes a proficiency checklist that employers can use to perform a practical evaluation. Upon completion, trainees will be able to download and print a certificate or wallet card to show that they have completed Risk Assessment training. NOTE: Only an employer can designate an employee as certified. Certification requirements can vary by state or province. Check local standards for any additional occupational training requirements.

This online Risk Tolerance course uses 5 short videos on the dangers of taking risks and the reality that injuries can happen to anyone. The videos include high-impact stories of real-life events and their consequences. By the end of the course, workers will have a strong understanding of why it’s important to be aware of their personal risk tolerance levels and watch out for hazards.

This course is a Training Class for Roller-Compactor. This course satisfies requirements for the classroom portion of operator safety training. Quiz questions along the way prepare you for the final written exam. Upon completion, you will be able to print your certificate and wallet card. A checklist will also be made available which can be used by your employer to observe you on the machine.

Our SCBA training course is regulation compliant, and our online version fulfills classroom training requirements. Each class contains sections on understanding and inspecting equipment, safe operating procedures, and general rescue techniques. This presentation includes intermittent practice quiz questions to prepare for the final written exam included with the course. In addition to the written exam, this course also includes a checklist for employers to use when administering a practical exam as required by OSHA. Estimated Training Length: Because everyone learns and progresses at different speeds, the amount of time you spend taking this training will vary. However, the estimated time for this training is approximately 1 hour. Intended Audience: Employees Supervisors Though you will still need to familiarize yourself with all other applicable federal, state, and local standards, this training encompasses the following laws and regulations: NFPA 1852—Selection, Care, and Maintenance of Open-Circuit Self-Contained Breathing Apparatus 29 CFR 1910.134—Respiratory Protection

Backing is our weakest skill because we spend 99% of our time driving forward. A consistent defensive approach to backing and turning can reduce the likelihood of driver error. This online Safe Backing & Turning course is designed to provide new drivers as well as veteran drivers with a better understanding of safe backing and turning procedures. After completing this course, an understanding should be gained of: Pre-trip inspections Safe backing and turning procedures Identification of potential hazards How to use spotters Blind spots

This is a Canada-compliant safety training course intended for new riggers and signalers. This training covers slings, hardware, lifting devices, sling angles and stresses, sling hitches, crane operations, and communication. This course meets the classroom requirement for occupational safety training. It also includes a proficiency checklist that employers can use to perform a practical evaluation. Upon completion, trainees will be able to download and print a certificate or wallet card to show that they have completed Canada Rigger and Signalperson - Basic training. NOTE: Only an employer can designate an employee as certified. Certification requirements can vary by state or province. Check local standards for any additional occupational training requirements.

This online Basic Rigging course includes 3 modules that cover the practices and techniques for safe slinging and rigging of loads. The material in this training course is designed for rigging personnel who work with all types of hoisting equipment. Basic Rigging Course Standards This course was designed to help satisfy requirements of the following standards: CSA Z150-98 It also adheres to ANSI (American National Standards Institute) and ASME (American Society of Mechanical Engineers) standards.

The most current ASME standards were used to create this new 2020 Rigging - Level 1 course which covers rigging techniques, inspections, and clarifies rigging misconceptions. Student's also gain access to a library of online competency assessment forms to further enhance their learning experience.

This online Rigging and Slinging (Advanced) course includes 5 modules covering practices and techniques to safely sling and rig loads according to the CSA (Canadian Standards Association) Z150-98 regulation, which is applicable across Canada. It also adheres to ANSI (American National Standards Institute) and ASME (American Society of Mechanical Engineers) standards.

This is a Canada-compliant safety training course intended for those conducting risk assessments. Topics covered in this training include identify and assess risks, control the hazard, and evaluate the cost. This course meets the classroom requirement for occupational safety training. It also includes a proficiency checklist that employers can use to perform a practical evaluation. Upon completion, trainees will be able to download and print a certificate or wallet card to show that they have completed Canada Risk Assessment training. NOTE: Only an employer can designate an employee as certified. Certification requirements can vary by state or province. Check local standards for any additional occupational training requirements.

This collection of risk audit school courses introduces participants to the basic concepts of risk, types of risks, and risk management (ERM) frameworks such as ISO 3000 and COSO ERM, and the IIA’s professional guidance on risk management. It also covers how to conduct risk assessments and ways of reviewing several common types of functional risk assessments, such as a fraud risk assessment, an IT risk assessment, a financial risk assessment, and best practices.

In today's fast paced world, it seems that many drivers carry their frustrations and impatience into their vehicle with them. Road rage is something you must be aware of and control as a driver. This online Road Rage course is designed to give you the information you need to avoid becoming the victim of road rage - or succumbing to it yourself. After completing this course, an understanding should be gained of: Distinguish between aggressive driving and road rage List the triggers for road rage and the traits of road rage drivers Describe what you can do to avoid becoming a victim of road rage State the actions to take if you encounter a road rage driver Describe what you can do to avoid experiencing road rage yourself

Our SCBA training course is regulation compliant, and our online version fulfills classroom training requirements. Each class contains sections on understanding and inspecting equipment, safe operating procedures, and general rescue techniques. This presentation includes intermittent practice quiz questions to prepare for the final written exam included with the course. In addition to the written exam, this course also includes a checklist for employers to use when administering a practical exam as required by OSHA. Estimated Training Length: Because everyone learns and progresses at different speeds, the amount of time you spend taking this training will vary. However, the estimated time for this training is approximately 1 hour. Intended Audience: Employees Supervisors Though you will still need to familiarize yourself with all other applicable federal, state, and local standards, this training encompasses the following laws and regulations: CSA Z94.4-11—Selection, Use and Care of Respirators CSA Z180.1-13—Compressed Air and Systems

Learn how to use the power of SEO (Search Engine Optimization) to grow your traffic with this video course. Shortcut your success and get results in weeks, not years. Avoid the high cost of 3rd party marketing and harness the power of SEO to get thousands of high-quality visitors for free, 24/7. The course consists of 10 video modules and a 50-page eBook resource.

Developed with input from a cross-sector of industries, this new online Safe Excavation 0.25 days (up to 2 hours) course is aimed at developing safe excavation skills and attitudes. This e-learning course explains how to excavate safely as part of the ground disturbance process. It discusses soil factors, sloping, benching, scaling and trimming, temporary protective structures and alternatives, worker access, and temporary crossing ramps the necessary process to plan and safely excavate as per applicable regulatory federal and provincial/state requirements, acts and industry best practices. Who Should Take This Course? All individuals, including supervisors, ground disturbers, excavators, project managers, and workers, who need specific ground disturbance training with respect to soil factors, sloping, benching, scaling and trimming, temporary protective structures and alternatives, shoring, shielding, worker access, and temporary crossing ramps.